2 Wordplaces use 2 different network connections.

[vanhien]

Hello everyone,
Currently, I am using the Asrer software to run Fivem in GTA 5. However, I am facing network-related issues.
Wordplaces 1 is using an Ethernet Cable connection.
Wordplaces 2 is using a USB Wifi connection.
Therefore, I would like to know how to set up to switch between these two connections. Please guide me on the appropriate settings. Thank you for taking the time to read and assist with my issue.

[beast2040]

Everything is quite simple.
Add static IPs for your network cards, and then assign these IPs to ASTER.

[vanhien]

I tried static ip. However, I will not be able to access the internet

[psychrabi]

When you set the Static IP you have to make sure that the IP you assigned is not used by other devices and that the IP is within the range your router has set.

[hanajijang]

Assign static IP addresses to your network cards, and then allocate these IPs to ASTER.

[laurawoods]

To switch between Ethernet and USB WiFi connections on your PC, you can open Network Connections, disable the current connection, then enable the desired one from the available options.

[EmmaAlva]

If you want to switch to Ethernet, connect your Ethernet cable to your computer.
If you want to switch to WiFi, connect to your WiFi network using the USB WiFi adapter.

[mariakenneth]

You can set up your computer to switch between the Ethernet and USB Wi-Fi connections by prioritizing the network connections. You can do this by adjusting the network adapter settings in the Network and Sharing Center on Windows, or in the Network preferences on a Mac. Prioritizing the Ethernet connection over the Wi-Fi connection will ensure that your computer uses the Ethernet connection whenever it's available, and switches to Wi-Fi when the Ethernet connection is unavailable.