2 Wordplaces use 2 different network connections.

Post Reply
vanhien
Posts: 2
Joined: Wed Nov 22, 2023 7:17 pm

2 Wordplaces use 2 different network connections.

Post by vanhien » Wed Nov 22, 2023 7:24 pm

Hello everyone,
Currently, I am using the Asrer software to run Fivem in GTA 5. However, I am facing network-related issues.
Wordplaces 1 is using an Ethernet Cable connection.
Wordplaces 2 is using a USB Wifi connection.
Therefore, I would like to know how to set up to switch between these two connections. Please guide me on the appropriate settings. Thank you for taking the time to read and assist with my issue.

beast2040
Posts: 150
Joined: Sun Sep 21, 2014 2:52 pm

Re: 2 Wordplaces use 2 different network connections.

Post by beast2040 » Thu Nov 23, 2023 10:27 am

Everything is quite simple.
Add static IPs for your network cards, and then assign these IPs to ASTER.

vanhien
Posts: 2
Joined: Wed Nov 22, 2023 7:17 pm

Re: 2 Wordplaces use 2 different network connections.

Post by vanhien » Fri Dec 01, 2023 11:25 pm

I tried static ip. However, I will not be able to access the internet

psychrabi
Posts: 76
Joined: Tue Jul 04, 2017 1:49 pm

Re: 2 Wordplaces use 2 different network connections.

Post by psychrabi » Thu Dec 07, 2023 5:40 am

When you set the Static IP you have to make sure that the IP you assigned is not used by other devices and that the IP is within the range your router has set.

hanajijang
Posts: 1
Joined: Wed Dec 27, 2023 7:55 am

Re: 2 Wordplaces use 2 different network connections.

Post by hanajijang » Wed Dec 27, 2023 7:58 am

Assign static IP addresses to your network cards, and then allocate these IPs to ASTER.

psychrabi
Posts: 76
Joined: Tue Jul 04, 2017 1:49 pm

Re: 2 Wordplaces use 2 different network connections.

Post by psychrabi » Tue Jan 23, 2024 3:59 pm

Refer to this video about IP assignment
https://www.youtube.com/watch?v=fGZJdIppL4A

Just difference will be that you have to set 1 static ip for each network connection.

laurawoods
Posts: 1
Joined: Thu Feb 22, 2024 6:36 am

Re: 2 Wordplaces use 2 different network connections.

Post by laurawoods » Thu Feb 22, 2024 6:38 am

To switch between Ethernet and USB WiFi connections on your PC, you can open Network Connections, disable the current connection, then enable the desired one from the available options.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest