Need help with XP-Pen Deco 01 V2 Driver

Post Reply
Wisdawms
Posts: 5
Joined: Sat Mar 25, 2023 1:59 pm

Need help with XP-Pen Deco 01 V2 Driver

Post by Wisdawms » Sat Mar 25, 2023 2:03 pm

So I have 2 monitors, and I want to use the XP-Pen drawing tablet on the second guest monitor (not main one)
but when I Install the driver program for the tablet it only works on the main monitor, and the driver program is important for the tablet to function properly like shortcuts and whatnot.

Any workaround to this?

beast2040
Posts: 150
Joined: Sun Sep 21, 2014 2:52 pm

Re: Need help with XP-Pen Deco 01 V2 Driver

Post by beast2040 » Wed Mar 29, 2023 8:53 pm

First, check that all devices (parts of the tablet) are assigned to the second workplace. To do this, disconnect/connect XP-Pen and assign together all the devices that will appear in the ASTER settings. Also apply the special setting chklevel100 (administrator rights are needed) and restart the PC. If there is software for XP-Pen in the startup, then you need to remove it from the general startup and add the second user to the startup.

Wisdawms
Posts: 5
Joined: Sat Mar 25, 2023 1:59 pm

Re: Need help with XP-Pen Deco 01 V2 Driver

Post by Wisdawms » Sun Apr 02, 2023 7:18 pm

beast2040 wrote:
Wed Mar 29, 2023 8:53 pm
First, check that all devices (parts of the tablet) are assigned to the second workplace. To do this, disconnect/connect XP-Pen and assign together all the devices that will appear in the ASTER settings. Also apply the special setting chklevel100 (administrator rights are needed) and restart the PC. If there is software for XP-Pen in the startup, then you need to remove it from the general startup and add the second user to the startup.
Didn't work properly unfortunately, my workaround for now is to just make the second monitor, which is the one I'd like to use the drawing tablet on, the main computer (Place 1).

Wisdawms
Posts: 5
Joined: Sat Mar 25, 2023 1:59 pm

Re: Need help with XP-Pen Deco 01 V2 Driver

Post by Wisdawms » Sun Apr 02, 2023 10:17 pm

Apparently that's not a very good workaround either, as my main drivers like Geforce Experience also only work on Place 1.

Wisdawms
Posts: 5
Joined: Sat Mar 25, 2023 1:59 pm

Re: Need help with XP-Pen Deco 01 V2 Driver

Post by Wisdawms » Sun Apr 02, 2023 11:21 pm

I would appreciate someone finding a solution to this, as it appears that it is not just exclusive to the tablet driver, but every other driver.

beast2040
Posts: 150
Joined: Sun Sep 21, 2014 2:52 pm

Re: Need help with XP-Pen Deco 01 V2 Driver

Post by beast2040 » Mon Apr 03, 2023 8:59 pm

about the operation of Geforce Experience - look in the scheduler for tasks for it and change them so that they run for the user of the second workplace.

about the XP-Pen - such devices may not work on additional places, as they include services and virtual devices.
However, there was a positive experience of setting up PenTablet at the second workplace. If you did everything correctly from what was recommended earlier, then try applying this registry patch and check the tablet after reboot.

Wisdawms
Posts: 5
Joined: Sat Mar 25, 2023 1:59 pm

Re: Need help with XP-Pen Deco 01 V2 Driver

Post by Wisdawms » Tue Apr 04, 2023 12:36 am

beast2040 wrote:
Mon Apr 03, 2023 8:59 pm
about the operation of Geforce Experience - look in the scheduler for tasks for it and change them so that they run for the user of the second workplace.

about the XP-Pen - such devices may not work on additional places, as they include services and virtual devices.
However, there was a positive experience of setting up PenTablet at the second workplace. If you did everything correctly from what was recommended earlier, then try applying this registry patch and check the tablet after reboot.
Thank you for the help, it does work to an extent but when in Windows Ink mode (which enables pen pressure sensitivity) the tablet moves the cursor in both monitors not just the intended one.

beast2040
Posts: 150
Joined: Sun Sep 21, 2014 2:52 pm

Re: Need help with XP-Pen Deco 01 V2 Driver

Post by beast2040 » Tue May 16, 2023 6:39 pm

Contact tech support about this.
The request must be sent from ASTER and select the type of report "detailed system information"

victorpatrick
Posts: 2
Joined: Mon May 29, 2023 5:33 am

Re: Need help with XP-Pen Deco 01 V2 Driver

Post by victorpatrick » Mon May 29, 2023 5:39 am

If you're experiencing issues with using your XP-Pen drawing tablet on the second monitor and the driver program only works on the main monitor, here are a few workarounds you can try:
Check for driver updates: Ensure that you have the latest driver software for your XP-Pen drawing tablet. Visit the manufacturer's website and download the most recent driver version compatible with your tablet model. Sometimes, updated drivers provide better multi-monitor support.
Change the main monitor: In Windows, you can change the main display monitor by going to the display settings. Set the second monitor as the main display and connect your XP-Pen drawing tablet to that monitor. This may help the driver program recognize the tablet and function properly on the second monitor. tunnel rush

MelissaBecker
Posts: 2
Joined: Tue Oct 18, 2022 10:43 am

Re: Need help with XP-Pen Deco 01 V2 Driver

Post by MelissaBecker » Wed Jul 05, 2023 4:42 am

Thank you for your assistance. While in Windows Ink mode, which allows for pen pressure sensitivity, the tablet moves the cursor across both monitors rather than just the one for which it is meant. geometry dash

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests