Multiple monitors per users? Is there a fix?

Post Reply
thibodeau.sim
Posts: 6
Joined: Thu Jan 19, 2023 8:26 pm

Multiple monitors per users? Is there a fix?

Post by thibodeau.sim » Thu Jan 19, 2023 8:34 pm

So, My setup has 3 monitors. Using Aster, I can only allocate 2 of them, one to each user. Is there ANY way to allocate 2 monitors to the first user, and one to the first user? I'm loving the trial so far but this is the one thing keeping me on the fence from buying a license.

Here are the monitors:
LG dualup (28MQ780-B)
LG 38gn950-b
These first two I would one one user to use.
LG 32GQ950-b
This last one would go to the second user.

PC: R9 7950x, RTX 3090, 64GB DDR5 Ram, windows 11.

I've read of some obscure solutions here with VGA adapters, but there is no way my monitors can run on VGA, they are too high end. The monitors can be ran on either HDMI or DisplayPort, but there is only one HDMI port on my GPU, 3 DP ports. My motherboard has one HDMI out from the integrated graphics, and one DP input connecting it to the GPU (for USB4 video output from the GPU).

The first monitor (dualup 28MQ780-B) I don't mind running on the integrated graphics if that's the only option, but the last 2 I would ideally prefer to have them running on the GPU.

Thank you all for your help. Hopefully we can find a solution, it seems to be an issue that many users are having. Cheers!

beast2040
Posts: 150
Joined: Sun Sep 21, 2014 2:52 pm

Re: Multiple monitors per users? Is there a fix?

Post by beast2040 » Fri Jan 20, 2023 12:20 am

This has been discussed here many times and is easily found through a search.


roland
Posts: 1
Joined: Mon Feb 06, 2023 10:05 am

Re: Multiple monitors per users? Is there a fix?

Post by roland » Mon Feb 06, 2023 10:09 am

I want to ask if there is a way to use the same PC for different users and different monitors so fnf mods

mariahcarey
Posts: 2
Joined: Tue Oct 31, 2023 7:01 am

Re: Multiple monitors per users? Is there a fix?

Post by mariahcarey » Tue Oct 31, 2023 7:06 am

Consider the capabilities of your monitors. If they support multiple input sources, you can switch between inputs to allocate monitors to different users. For example, one user could use HDMI while the other uses DisplayPort.wordle

forwardjellyfish
Posts: 1
Joined: Wed Nov 01, 2023 11:09 am

Re: Multiple monitors per users? Is there a fix?

Post by forwardjellyfish » Wed Nov 01, 2023 11:11 am

Ensure that all monitors have identical resolutions and refresh rates. Conflicts can result from mismatched configurations.
Try various interfaces and cables for your monitor. Often, only one device is affected by a connection failure. If displays sporadically disconnect, power settings may need adjusted to prevent powering off.
MS Windows XPgeometry dash lite

selenaoh123
Posts: 2
Joined: Thu Dec 14, 2023 12:25 pm

Re: Multiple monitors per users? Is there a fix?

Post by selenaoh123 » Thu Dec 14, 2023 12:32 pm

Assign one GPU to each user. Since you have both an RTX 3090 and integrated watermelon game graphics, you could allocate the RTX 3090 for one user and the integrated graphics for the other.

selenaoh123
Posts: 2
Joined: Thu Dec 14, 2023 12:25 pm

Re: Multiple monitors per users? Is there a fix?

Post by selenaoh123 » Thu Dec 14, 2023 12:32 pm

If your monitors support DisplayPort daisy chaining, you may be able to connect them in series using a single DisplayPort cable watermelon game from your GPU to the first monitor, and then from the first monitor to the second one.

emilyevans
Posts: 1
Joined: Sat Jan 06, 2024 10:13 am

Re: Multiple monitors per users? Is there a fix?

Post by emilyevans » Sat Jan 06, 2024 10:14 am

Since PD12, Parallels no longer works properly across multiple monitors, and is about as useful as not having any multi-monitor support at all. retro bowl college

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests