-
y.petremann
- Posts: 2
- Joined: Thu Jul 22, 2021 10:35 am
Post
by y.petremann » Thu Jul 22, 2021 10:56 am
Hello
I currently have this setup :
- 2 terminals configured in aster with their corresponding windows session.
- Terminal 1 (that I use) have 1 Nvidia 1050 Ti with two screens (1 hdmi , 1 displayport)
- Terminal 2 (that my husband use, a non-tech guy) 1 Nvidia 1050 with two screens (1 hdmi, 1 displayport)
I can't swap the physical connection of the screens and I can only swap the screens physically for the Terminal 1.
The problem is that for the two terminal the screen are inverted and the screen configuration is reset at startup.
-
beast2040
- Posts: 151
- Joined: Sun Sep 21, 2014 2:52 pm
Post
by beast2040 » Thu Jul 29, 2021 11:15 pm
The settings will be saved if you change them while ASTER disable.
-
y.petremann
- Posts: 2
- Joined: Thu Jul 22, 2021 10:35 am
Post
by y.petremann » Fri Aug 06, 2021 11:15 pm
Thanks, it worked.
It should be indicated somewhere to prevent future problems, the FAQ doesn't tell anything about that.
-
zaku49
- Posts: 14
- Joined: Sun Feb 05, 2017 9:23 am
Post
by zaku49 » Mon Sep 13, 2021 3:59 am
-Second user's main monitor not sticking/resetting, 2 screen user.
I wanted to share that I had to disable aster, then login as the second user, assign their main monitor and then start aster for it to stay.
Who is online
Users browsing this forum: No registered users and 14 guests