Multiscreen configuration reset at startup.

Post Reply
y.petremann
Posts: 2
Joined: Thu Jul 22, 2021 10:35 am

Multiscreen configuration reset at startup.

Post by y.petremann » Thu Jul 22, 2021 10:56 am

Hello

I currently have this setup :
  • 2 terminals configured in aster with their corresponding windows session.
  • Terminal 1 (that I use) have 1 Nvidia 1050 Ti with two screens (1 hdmi , 1 displayport)
  • Terminal 2 (that my husband use, a non-tech guy) 1 Nvidia 1050 with two screens (1 hdmi, 1 displayport)
I can't swap the physical connection of the screens and I can only swap the screens physically for the Terminal 1.

The problem is that for the two terminal the screen are inverted and the screen configuration is reset at startup.

beast2040
Posts: 96
Joined: Sun Sep 21, 2014 2:52 pm

Re: Multiscreen configuration reset at startup.

Post by beast2040 » Thu Jul 29, 2021 11:15 pm

The settings will be saved if you change them while ASTER disable.

y.petremann
Posts: 2
Joined: Thu Jul 22, 2021 10:35 am

Re: Multiscreen configuration reset at startup.

Post by y.petremann » Fri Aug 06, 2021 11:15 pm

Thanks, it worked.
It should be indicated somewhere to prevent future problems, the FAQ doesn't tell anything about that.

zaku49
Posts: 12
Joined: Sun Feb 05, 2017 9:23 am

Re: Multiscreen configuration reset at startup.

Post by zaku49 » Mon Sep 13, 2021 3:59 am

-Second user's main monitor not sticking/resetting, 2 screen user.

I wanted to share that I had to disable aster, then login as the second user, assign their main monitor and then start aster for it to stay.

Post Reply

Who is online

Users browsing this forum: No registered users and 47 guests