Display position (multi monitor)

Post Reply
redflux
Posts: 2
Joined: Wed May 01, 2019 4:00 pm

Display position (multi monitor)

Post by redflux » Wed May 01, 2019 4:15 pm

Hi,
is there any solution to save the position of multi-monitors?

I got all 4 monitors for 2 users. 2 VGA, each 2 monitors.
I did first display is right, second display is left.

but monitor's position has been reset all the time after boot.
as first display to the left, second display to the right...

Asternewuser
Posts: 3
Joined: Sun Jun 02, 2019 4:30 pm

Re: Display position (multi monitor)

Post by Asternewuser » Sun Jun 02, 2019 4:38 pm

I am having the same problem. Windows 10, 2 screens only (with 2 x keyboards/ 2 mice)

One screen connected VGA, second Displaylink on PC using convertor lead to HDMI screen

Each time the PC sleeps or it is shut down the screens SWAP - If you shut it down again it SWAPS back again

Any ideas welcome

pistolpete_1980
Posts: 5
Joined: Wed Oct 31, 2018 7:03 am

Re: Display position (multi monitor)

Post by pistolpete_1980 » Sun Jun 09, 2019 8:44 am

I find if you plug in monitors without restarting windows, windows will sometimes reassign the monitors.

What I find works is, plug in your monitors. Restart Windows with Aster Disabled.
Then Assign your monitors in Aster workplaces, apply, then restart again still with Aster Disabled, after windows reboots, check to see if the monitors are assigned properly in ASter, if so enable Aster workplaces and reboot. This seems to work for me.

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests