Monitors do not sleep with splitter configuration

Post Reply
BeerNecessities
Posts: 6
Joined: Wed Nov 21, 2018 11:38 am

Monitors do not sleep with splitter configuration

Post by BeerNecessities » Wed Nov 21, 2018 11:55 am

I have used aster before with gtx 1050ti and usb 3 display card and it sleeped perfect with 2 stations. Today I got rid of the usb 3 display and one monitor. I put a 4k splitter on the 4k monitor on tv. Display port through to VGA adapter and to 1080p display. It works great except the both stations just blink a couple of times when trying to sleep. The monitors sleep when aster is disabled. Is this a known issue with splitters and one graphics card?

BeerNecessities
Posts: 6
Joined: Wed Nov 21, 2018 11:38 am

Re: Monitors do not sleep with splitter configuration

Post by BeerNecessities » Fri Nov 30, 2018 3:23 pm

I also noticed in NVIDIIA control panel and windows display settings that both monitors are cloned. When I try to extend displays it just reverts back to cloned. The two stations work great but do not sleep. One station monitor briefly goes off for a second randomly.

BeerNecessities
Posts: 6
Joined: Wed Nov 21, 2018 11:38 am

Re: Monitors do not sleep with splitter configuration

Post by BeerNecessities » Mon Feb 11, 2019 4:27 pm

Still have the above problems 3 months later. I just updated aster from v2.22 to v2.24. I also updated NVIDIA drivers. 4K screen still blinks randomly and does not go to sleep. Please respond.

psychrabi
Posts: 21
Joined: Tue Jul 04, 2017 1:49 pm

Re: Monitors do not sleep with splitter configuration

Post by psychrabi » Fri Jun 21, 2019 8:11 am

Try with Screensaver option disable in the Personalisation settings page in Windows.

BeerNecessities
Posts: 6
Joined: Wed Nov 21, 2018 11:38 am

Re: Monitors do not sleep with splitter configuration

Post by BeerNecessities » Sat Jun 29, 2019 2:16 am

I think that did it. I set it to none.
Edit: Problem still persists. I had the cables mixed up.

psychrabi
Posts: 21
Joined: Tue Jul 04, 2017 1:49 pm

Re: Monitors do not sleep with splitter configuration

Post by psychrabi » Mon Aug 05, 2019 1:29 pm


BeerNecessities
Posts: 6
Joined: Wed Nov 21, 2018 11:38 am

Re: Monitors do not sleep with splitter configuration

Post by BeerNecessities » Thu Aug 08, 2019 9:45 pm

Still does the same thing. Blinks a couple of times. Neither station sleeps.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest