Aster Multiseat Problem

Post Reply
awesomeguy
Posts: 1
Joined: Tue Apr 12, 2016 1:35 am

Aster Multiseat Problem

Post by awesomeguy » Tue Apr 12, 2016 6:05 pm

I have a problem with the Aster Multiseat software that I bought.
These are my specs
-i7-3770
-Intel HD Graphics 4000
-EVGA GTX 750 Ti SC
-1TB WD Blue HDD
-H77 Chipset
-16GB RAM
-Windows 10 Pro 64-bit
-All drivers updated

I have both monitors attached to my EVGA GPU. The problem is that I can only use one terminal at a time. The other monitor is black and flashes white now and then.

EsaMimbias
Posts: 2
Joined: Mon Apr 18, 2016 12:07 am

Re: Aster Multiseat Problem

Post by EsaMimbias » Mon Apr 18, 2016 12:12 am

Hi,

do the screens have the same resolution. I've got a similar behavior :
Terminal 1 is 1920x1080
Terminal 2 is 1680x1050
when I log on terminal 1, both screens start blinking until I set Terminal 1 resolution to 1680x1050.

Never had this problem with v7 on Windows 7 ... will send a support request ASAP.

beast2040
Posts: 130
Joined: Sun Sep 21, 2014 2:52 pm

Re: Aster Multiseat Problem

Post by beast2040 » Sat May 07, 2016 1:19 am

awesomeguy wrote:The problem is that I can only use one terminal at a time. The other monitor is black and flashes white now and then.
Please ensure that you have not installed the GF Experience and 3D Vision utilities (you can check it in Control Panel\Programs and Features).
The ASTER software can not work normal with these.

bazantik
Posts: 25
Joined: Tue Jun 02, 2015 12:13 pm

Re: Aster Multiseat Problem

Post by bazantik » Thu Jul 14, 2016 7:01 pm

Weird... I have installed GF Experience and I am using 3D TV Play (with my dataprojector) and everything works fine. Maybe I am just lucky.

aurorausa0106
Posts: 1
Joined: Thu Sep 22, 2022 1:37 pm

Re: Aster Multiseat Problem

Post by aurorausa0106 » Thu Sep 22, 2022 1:43 pm

This is a common problem when you access on 2 devices, so install one more device so the problem will not repeat. drift boss smash karts

prasedenica
Posts: 1
Joined: Thu Oct 27, 2022 7:48 am

Re: Aster Multiseat Problem

Post by prasedenica » Thu Oct 27, 2022 7:52 am

Your monitor's display may flicker on and off if your graphics card is not properly installed in your motherboard. If your motherboard comes with built-in graphics, you can quickly verify this. Your graphics card's monitor cable should be unplugged and plugged into the motherboard's display slot.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest